TX-1 Series Instrument
www.tensitron.com
pg. 12
▪
Follow and enter the prompts to turn this feature on or off, or to edit
your high and low values. (See Figure 7.)
o
Version
Press this button to determine
the instrument’s model and what level of
firmware is downloaded to the instrument.
•
DATA LOGGING Screen
Each time the instrument’s STORE button is pressed, a log of that material
tension will be stored in memory for later review.
o
Logging Rate (when logging Continuous Data)
To adjust the rate at which the tension readings are logged:
▪
Scroll to DATA LOGGING and press ENTER.
▪
Scroll to LOGGING RATE and press ENTER
▪
Select 1, 2, or 5 Hz and press ENTER.
o
Duration (when logging Continuous Data)
To adjust the duration that tension readings are logged:
▪
Scroll to DATA LOGGING and press ENTER.
▪
Scroll to DURATION and press ENTER
▪
Use the Up and Down arrows to change the Duration that you want
data stored and press ENTER. (Minimum: 10 seconds; Maximum:
100 seconds)
o
Select Mode
To change the mode that tension readings are logged:
▪
Scroll to DATA LOGGING and press ENTER.
▪
Scroll to SELECT MODE and press ENTER
▪
Use the Up and Down arrows to select either CONTINUOUS or
SINGLE POINT data collection.
o
View Data Stats
This feature allows the operator to view the basic statistics of the logged
data (Count, Average, Min/Max, and Standard Deviation). (See Figure 8.)
Set Point Setup Screen
See High and Low threshold values
Settings:
On / Off
Edit High Point Threshold
Edit High Point Threshold
Figure 7: Setpoint Setup
Data Statistics Screen
See the Count, Average,
Minimum/Maximum, and Standard
Deviation of the logged data.
Figure 8: Data Statistics Screen
