STX-1 Series Instrument
www.tensitron.com
pg. 5
Ambient Humidity
10% to 90% non-condensing
Dimensions
(See Figure 1)
STX-250-1:
5.00
” x 9.55” x 2.23”
STX-500-1 and STX-1000-1:
7.00
” x 9.55” x 2.23”
STXM-1000-1:
7.00
” x 10.30” x 2.23”
STX-2000-1:
8.48
” x 10.30” x 2.23”
Weight
2.3 lb. (depending upon instrument configuration).
Environment
Indoor or outdoor use, dust-free environment.
3. SAFETY AND MAINTENANCE
WARNING:
When using cordless, electronic instruments, always follow basic safety
precautions to reduce the risk of fire, electric shock and personal injury
USE ONLY A TENSITRON POWER SUPPLY TO AVOID DAMAGE
TO INSTRUMENT.
READ AND SAVE ALL INSTRUCTIONS.
Before use, ensure all users read
and understand this manual, as well as labels packaged with or attached to the
instrument.
•
Know your instrument.
Read this manual carefully to learn your tension meter’s
applications and limitations, as well as potential hazards associated with this type
of instrument.
•
Avoid dangerous environments. Do not use your instrument in explosive
atmospheres (gaseous fumes, dust or flammable materials). Do not submerge your
instrument in liquids.
•
Use the right tool or instrument. Do not use this instrument to do a job for which it is
not recommended.
•
Check for damaged parts. Inspect instrument before use. Check for any binding of
moving parts, improper mountings, broken parts and any other condition that may
affect operation. Do not use a damaged instrument. Tag damaged ins
trument “DO
NOT USE” until repaired. For repair, send instruments directly to Tensitron.
•
Guard against electric shock.
•
Maintain instrument carefully. Keep handles dry, clean and free from oil and
grease. Do not lubricate. All roller bearings are sealed.
•
Do not use instrument if it has received a sharp blow, been dropped or damaged in
any way. Do not disassemble. Incorrect reassembly may result in damage to the
instrument and risk of electric shock and fire. Return damaged instruments to
Tensitron for repair.
•
WARNING: Only use battery pack assemblies provided by Tensitron with your
meter. Other types of batteries might explode, causing personal injury and
damage. Unplug charger when not in use.
•
Tensitron recommends calibration by the manufacturer at one-year intervals, or
sooner if the meter is worn, damaged, or reading incorrectly. However, it is the
user’s responsibility to establish a suitable calibration interval, considering the
user’s accuracy requirements, requirements set by contract or regulation, and
environmental factors such as frequency and conditions of the meter’s use.