________________________________________________________________________________________________________________________________
TensioMed® Arteriograph24™
16
up in the tabulated list of measurements. The device
indicates the waking up by a
D
and by an
N
when the
patient goes to bed.
N 20‐39
2.4.1.4. By four short pushes on the button,
the device
can be switched off. You will see then “OFF” on the
display. In this state the series written above cannot be
applied and the measuring plan you set in the device will
be interrupted. If you intend to use the device again,
press the button again five times. Then “OFF” will
disappear from the display, all functions of the device
can be used again and the set measuring plan will be
continued.
OFF
2.4.2. Data transmission
The device downloads all the stored data to the physician's PC via Bluetooth
communication. The information loaded consists of:
-
the systolic and diastolic blood pressure values (mmHg)
-
the heart rate per minute
-
the arterial function parameters (central SBP, PP, brachial and aortic Aix, aortic
PWV)
-
the distinction between programmed and manual measurements
-
the date and time of the measurement
-
the active or passive period
-
the diary of medication intake.
If a Bluetooth communication is placed within the range
of the device and it works - as its operation is permitted
- the device and the PC will connect automatically. This
sign will appear on the LCD. The actual data
transmission does not happen, yet this can be started
by the TensioMed® TensioWin™ program.
BLUELINK
During the operation of the Bluetooth communication
between the device and the PC, when the actual data
transmission is on, the following sign will appear on the
LCD.
CONNECT
