________________________________________________________________________________________________________________________________
TensioMed® Arteriograph24™
13
2.3. Installing the Device
TensioMed® Arteriograph24™ is a battery operated device.
Insert 4 durable alkaline AA batteries into the Device with taking care of the right
polarity (see Figure 3)
Or insert 4 AA sized rechargeable Ni-MH or NiCd batteries as per the above
instruction. (Please note that new batteries must be pre-charged.)
o
For problem-free operation minimum 1,500 mAh chargeable Ni-MH or NiCd
batteries are recommended.
Figure 3.
The Ni-MH, NiCd batteries are rechargeable approximately one thousand times. If
the capacity of the rechargeable batteries is low, it is shown on the LCD automatically. In
this case please, change all the four batteries not only the ones you think are weak.
The clock circuits of the device are powered by a type Ni-Cd battery and it is
continuously charged by the AA batteries, therefore the clock time is held and resetting
the time is unnecessary between battery changes.
If you do not intend to use the device for a long period of time, remove the batteries
and store them in a cool and dry place. Do not apply heat to the batteries, or an internal
short circuit may occur.
Dispose of spent batteries immediately in an environmentally - safe way. The batteries
and charging appliances have their own Instructions for use, we suggest you study them
and follow the manufacturers’ guidelines.
Your computer must have active Bluetooth connection capability. The Bluetooth icon
appears in the system tray of your PC indicating an active Bluetooth service.
Then if the device is within 10 m from the Bluetooth, the computer will get into connection
with the device via the software. To transmit data, it is necessary to use the TensioMed®
TensioWin™ program, of course.
