Motivity v1.3
Technical Documentation
General Settings
In this page you can set some general settings, e.g. whether a Light or Temperature sensor is
attached to the Motivity base electronics.
You can also specify the “Read on Init delay time”. The “Read On Init” flag is a communication
object flag new for System B devices. If you set this flag on a communication object, then the
intensity will issue read requests upon power-up, to make sure that its status values are up-
to-date.
Set this value to a time, where you are certain that every bus device is up and running and will
answer read requests. In that way you assure that the internal states of the Intensity
correspond with the actual values.
List of available Communication Objects and Parameters:
©
Tense BVBA
15/03/17
6
Name
Value Range
Comment
Light Sensor Present
Yes/No
whether Light Sensor is attached
Temperature Sensor Present
Yes/No
whether Temperature Sensor is attached
Read On Init Delay[s]
4 – 255
Time To wait before reading objects with the ROI flag
