Motivity v1.3
Technical Documentation
Sensors
To obtain direc feedback about the Motion Detector and Brightness.
Motion Detector
If you only want to capture the state of the (debounced) Motion Detection sensor (e.g. For
Slave – Master setup) then you can use the “Detector Status” object.
You can also enable the Green Feedback LED for feedback.
©
Tense BVBA
15/03/17
11
Name
Value Range
Comment
Detector Status
Enable Feedback LED
Yes/No
Do Not Send, Send 1 on every
detection, Send 1 at start
Detection, 0 at end
whether to use a fixed scene value, or use
one from an external communication
object
turn on the (Green) LED when the motion
detector senses motion
No Name
I/O DPT
Flags
Use
5
Motion Detector Status
O DPT1.1
CT
motion detector status
