![TensCare QALM Скачать руководство пользователя страница 109](http://html1.mh-extra.com/html/tenscare/qalm/qalm_user-manual_1087654109.webp)
106
second) and the white LEDs light
will switch off.
Note: Always check unit
is OFF before applying
or removing the QALM
device from the forehead.
Note: Always clean the
forehead before using
the device.
PROGRAMME CONTROL
The ON/OFF button is also the
programme
select
button.
QALM
has
two
pre-set
programmes.
Every time the unit is switched
on, the programme 1 is
automatically selected. If you
wish to change to programme 2
press and release the ON/OFF
button. Programme 2 selection
will be indicated by two short
beeps.
To change back to programme
1, press and release the ON/OFF
button. A single beep will
indicate programme 1 has been
selected.
Every time a new programme is
selected, the strength level is
reverted to zero. This is a safety
feature to alleviate any sudden
feeling of a surge, as each
programme gives a different
sensation.
STRENGTH CONTROLS
The buttons marked , are the
strength controls.
To increase the intensity in steps
of 0.5 mA press and release the
button.
To
increase
automatically, press and hold
the button (fast increase in
steps of 0.5 mA). To decrease
the intensity in steps of 0.5 mA
press and release the button.
To decrease automatically,
press and hold the button (fast
decrease in steps of 0.5 mA).
A short beep will be heard with
each press of the strength
controls.
When using the strength
controls, reaching maximum or
minimum intensity will be
indicated by three quick beeps.
You may feel nothing over the
first few stages of increase.
Continue pressing until the
sensation
is
strong
but
comfortable. Further increases
during use may be necessary if
your body becomes used to the
sensation. Note that the
Содержание QALM
Страница 1: ...Manuale d istruzioni Instruction Manual ...
Страница 71: ...0 ...
Страница 96: ...25 ...
Страница 121: ...25 ...