or performed voluntarily.
For
example,
weak
contractions are defined
by little or no movement in
the pointer. Assemble the
pointer and attach to the probe as follows:
•
When performed correctly, the pointer
will move downwards.
•
When performed incorrectly, the pointer
will move upwards.
7. After your training session, switch the
control unit off, then remove the probe by
holding the positioning end rim and gently
pulling outwards.
CLEANING
It is important that the probe is cleaned before and after each use. Clean
with either an alcohol-free antibacterial wipe such as TensCare Wipes (see
X-WIPES) or by wiping with warm soapy water. Rinse under running water
and dry thoroughly and return the unit to the storage pouch.
Warnings:
Do not immerse the probe in a liquid.
Keep the device away from lint and dust, as long-term exposure to lint or
dust may affect the socket.
Keep the device away from sunlight, as long-term exposure to sunlight
may affect the rubber causing it to become less elastic and crack.
Keep away from children under 5 years of age. Long cable - risk of
strangulation in infants.
