TensCare BEAUTYMAX, Инструкция по эксплуатации, Страница: 12 / 38

11
•
Micro lifting (12 Hz to 20 Hz)
Toning facial muscles to improve both
the appearance and the dynamism of
facial muscles.
•
Modelling (12 Hz to 30 Hz)
Due to a combination of capillarizing
and toning impulses, this frequency
range helps mobilise fat in areas where
it tends to accumulate.
•
Firming up
(20 Hz to 30 Hz)
Firming up muscles working mainly on
slow-twitch fibres.
•
Lipolysis (30 Hz to 40 Hz)
This frequency range is used in
electrolipophoresis treatments to
improve the appearance of the skin.
•
Toning (40 Hz to 50 Hz)
Toning up working mainly on fast-twitch
fibres.
•
Definition and bulk
(60 Hz to 100
Hz)
Defining muscles in the arms and bust
working mainly on explosive fibres.
Grows muscle size.
For all programmes except
FACE,
PUBIS and RELAX follow the
guidelines below to set the intensity
level.
Phase 1 - Preparation: Turn up the
stimulation gradually, until you feel an
intermittent tingling.
Phases 2 to 6 - Activation: Increase
the intensity until you feel a very smooth
tensing under the pads, there should be
little visible movement.
Use a low intensity for the first session
to help you to understand how the
machine works.
During the programme and over the
next few days the intensity should be
increased gradually to produce marked,
but not painful muscle contractions.
Phase 7 - Cool down: Turn down the
intensity gradually until you can only
feel a mild tingling pulse.
For the programme FACE and PUBIS ,
which has just one phase, increase the
intensity to the point where you can just
see the muscle moving.
Note: The stimulation should
always remain comfortable
and relaxing.