Tennant R3 ReadySpace, Руководство оператора

Страница: 3 / 69

OPERATION
EN
3
Tennant R3 (03--08)
SAFETY PRECAUTIONS
This machine is intended for commercial use. It is
designed exclusively to clean carpet and
upholstery in an indoor environment and is not
constructed for any other use. Use only
manufacturer’s recommended attachments.
All operators must read, understand and practice
the following safety precautions.
The following warning alert symbol and the “FOR
SAFETY” heading are used throughout this manual as
indicated in their description:
WARNING: To warn of hazards or unsafe
practices which could result in severe personal
injury or death.
FOR SAFETY: To identify actions which must be
followed for safe operation of equipment.
The following safety precautions signal potentially
dangerous conditions to the operator or
equipment.
WARNING: Fire Or Explosion Hazard
-- Do Not Use or Pick Up Flammable Materials
-- Only Use Commercially Available Floor
Cleaners intended for machine application.
-- Do Not Use Near Flammable Liquids, Vapors Or
Combustible Dusts.
This machine is not equipped with explosion proof
motors. The electric motors will spark upon start
up and during operation which could cause a flash
fire or explosion if machine is used in an area
where flammable vapors/liquids or combustible
dusts are present.
WARNING: Electrical Hazard
-- Do Not Operate With Damaged Power Cord.
-- Do Not Modify Power Cord Plug.
-- Unplug Power Cord Before Servicing Machine.
If the power cord is damaged or broken, it must be
replaced by the manufacturer or its service agent
or a similarly qualified person in order to avoid a
hazard.
WARNING: Spinning Brush. Keep Hands
Away. Unplug Power Cord Before Servicing
Machine.
WARNING: Electrical Shock Hazard.
Do Not Use Outdoors. Do Not Expose To Rain.
Store Indoors.
FOR SAFETY:
1. Do not operate machine:
-- Unless trained and authorized.
-- Unless operator manual is read and
understood.
-- In an area where flammable vapors/liquids
or combustible dusts are present.
-- Unless power cord is properly grounded.
Only use the manufacturer--supplied power
cord which is designed exclusively for this
machine. Do not use additional extension
cords.
-- Outdoors.
-- If not in proper operating condition.
-- In standing water.
2. Before operating machine:
-- Make sure all safety devices are in place
and operate properly.
-- Place wet floor signs as needed.
3. When operating machine:
-- Do not run machine over power cord.
-- Do not pull machine by plug or power cord.
-- Do not pull power cord around sharp edges
or corners.
-- Do not unplug by pulling on power cord.
-- Do not stretch power cord.
-- Do not handle plug with wet hands.
-- Keep power cord away from heated
surfaces.
-- Report machine damage or faulty operation
immediately.
-- Do not allow children to play on or around
machine.
-- If foam or liquid begins to leak from
machine, immediately shut off machine.
4. Before leaving or servicing machine:
-- Turn off machine.
-- Unplug power cord from wall outlet.
5. When servicing machine:
-- Unplug power cord from wall outlet.
-- Avoid moving parts. Do not wear loose
jackets, shirts, or sleeves.
-- Do not power spray or hose off machine.
Electrical malfunction may occur.
-- Use manufacturer--supplied or approved
replacement parts.
-- All repairs must be performed by a
qualified service person.
-- Do not modify the machine from its original
design.
6. When transporting machine:
-- Unplug power cord from wall outlet.