ENGLISH
EN
BR2020/T (04–98)
9
CIRCUIT BREAKERS
Machine is equipped with two resettable circuit
breakers, Main (15A) and Pad Motor (80A), to
protect machine from damage. If pad motor circuit
breaker should trip, determine cause, allow motor
to cool, then reset. Pad circuit breaker will trip due
to excessive pad overload. Change pad or reduce
pad pressure if breaker should trip. Pad motor
circuit breaker button is located under battery
hood at front of machine.
Resettable Circuit Breakers
CHARGING BATTERIES
ATTENTION: RECHARGE BATTERIES ONLY
AFTER A TOTAL OF 30 MINUTES OF USE OR
MORE. THIS WILL PROLONG BATTERY LIFE.
ATTENTION: The following charging
instructions are intended for supplied 36V
chargers only. Or use a charger with the
following specifications to prevent battery
damage.
CHARGER SPECIFICATIONS:
OUTPUT VOLTAGE - 36 VOLTS
OUTPUT CURRENT - 35 AMPS
AUTOMATIC SHUTOFF CIRCUIT
FOR DEEP CYCLE BATTERY CHARGING
ATTENTION: For optimum machine operation,
keep batteries charged at all times. Never let
batteries set in a discharge condition for lengthy
periods.
CAUTION: Do not operate machine when
battery meter needle is in the red zone, battery
damage will result.
WARNING: Charge batteries in a well
ventilated area. Batteries emit hydrogen gas.
Explosion or fire can result. Keep sparks and
open flame away.
WARNING: Shield eyes when servicing
batteries and avoid contact with battery acid.
1.
Transport machine to a well ventilated area
for charging.
2.
Park machine on a level surface and turn off
all switches. Set parking brake if equipped.
3.
Unlatch battery hood and open battery
compartment.
Open Battery Compartment
4.
Check fluid level ‘‘A” in each battery cell. Do
not charge batteries unless fluid is slightly
covering battery plates ‘‘B”. If needed, add
just enough fluid to cover battery plates, do
not overfill. Batteries can overflow during
charging due to expansion. Replace cell caps
before charging.
A
B
Check Battery Fluid Level
5.
With charger disconnected from machine,
plug charger’s power cord into a grounded
wall outlet.
Grounded
Grounding
Edge/hole
Outlet
Connect Grounded Outlet
WARNING: To avoid an electrical hazard,
charger must be grounded while in use to
protect user from electric shock and serious
injury.
