ENGLISH
EN
BR2020/T (04–98)
11
3.
Keep battery tops and terminals clean and
dry.
a.
Mix a strong solution of baking soda and
water.
b.
Brush solution sparingly over battery tops,
terminal and cable connectors.
NOTE: Do not allow baking soda solution to
enter battery cells.
c.
Use wire brush to clean terminal post and
cable connections.
d.
After cleaning, apply a coating of clear
battery post protectant to terminals and
cable connections.
4.
Check for loose or worn cables. Replace if
worn.
TRANSPORTING MACHINE
When transporting machine by use of trailer or
truck, be certain to follow tie–down procedures
below:
ATTENTION: TILT machine back when
loading and unloading to prevent dust skirt
damage.
WARNING: Use adequate personnel for
assistance when loading and unloading
machine.
1.
Load machine using a recommended loading
ramp.
2.
Position front of machine up against front of
trailer of truck.
3.
Set parking brake if equipped and place
blocks behind the main wheels.
4.
Place tie–down straps over top of machine
and secure straps to floor. It may be
necessary to install tie–down brackets to the
floor of your trailer or truck.
CAUTION: Do not transport machine
tilted back, battery acid may leak.
STORING MACHINE
Store machine in a dry area in the upright
position.
CAUTION: Do not store machine tilted
back, battery acid may leak.
CAUTION: Do not expose to rain. Store
indoors.
SPECIFICATIONS
Model
BR2020
BR2020T
LENGTH
132cm
132cm
WIDTH
61 cm
61 cm
HEIGHT
102cm
102cm
WEIGHT WITH BATTERIES
238 Kg
245 Kg
DRIVE SYSTEM
N/A (Pad assisted)
.2 hp Transaxle
DRIVE SPEED
N/A
0–73M min.
PAD WIDTH
508 mm
508 mm
PAD MOTOR
36V, 3hp, 2000 rpm, 80A, 2238W
36V, 3hp, 2000 rpm, 80A, 2238W
PAD PRESSURE
Variable 7 – 19 kg
Variable 7 –19 kg
DUST CONTROL BAG
Cloth – 98% @ 1.0 micron
Cloth Bag – 98% @ 1.0 micron
BATTERIES
3–12 Volt (optional)
3–12 Volt (optional)
RUN TIME, CONTINUOUS
Up to 2.4 hours
Up to 2.2 hours
DECIBEL RATING AT
OPERATOR’S EAR, INDOORS ON
TILE
70dB(A)
70dB(A)
