Tennant 235D Скачать руководство пользователя страница 47

Страница: 47 / 203

MAINTENANCE

3-11

235 MM331 (3--93)

5. Start the engine.

6. Move the directional pedal into the “forward”

position and release it. The rear wheel

should stop rotating as soon as the pedal is

released. Stop the engine and adjust the

centering bolt as required.

7. Move the directional pedal into the “reverse”

position and release it. The rear wheel

should stop rotating as soon as the pedal is

released. Stop the engine and adjust the

centering bolt as required.

NOTE: If there is not enough adjustment in the

centering bolts, reposition the centering stop.

8. Tighten the jam nuts.

9. Raise the rear of the machine, remove the

jack stands, and lower the machine.

10. Adjust the position of the directional pedal

ball joints so the pedal hits the floor when

the directional pedal is pressed backward.

The backward travel should be restricted so

the machine will not travel faster than 3 mph

(5 km/h) in reverse.

11. Tighten the directional pedal ball joints and

jam nuts.

LIFT ARM SPEED LIMITER

The lift arm speed limiter limits the forward speed

the machine can travel when the hopper is raised.

The speed limiter should be adjusted whenever

the pump control linkage is adjusted. The

machine should travel 2 mph (3 km/h) with the

hopper raised.

The speed limiter consists of a cam under the

directional pedal with a link to the lift arms. When

the hopper is raised, the link lifts the cam under

the pedal. This limits how far the directional pedal

can be pressed, limiting the machine speed.

To adjust the limited speed, raise the hopper and

engage the hopper support bar. Loosen the two

bracket bolts and slide the bracket and cam

forward to increase speed or slide the bracket

backward to decrease speed. Tighten the bolts.

03507

SPEED LIMITER LINK

A. Bracket and Cam

B. Bracket Bolts

Содержание 235D












































































































































































































Результаты поиска

Содержание 235D

Отзывы:

Похожие инструкции для 235D

Бренды по названию

Популярные бренды

Tennant 235D, Руководство пользователя

Результаты поиска

Содержание 235D

Отзывы:

Похожие инструкции для 235D

Бренды по названию

Популярные бренды