Tennant 140 Скачать руководство пользователя страница 34

Страница: 34 / 104

MAINTENANCE

140 MM130 (12--96)

3-12

DEBRIS HOPPER AND DUST FILTER

DEBRIS HOPPER

The machine debris hopper collects debris swept

up by the main brush. It should be emptied after

every work shift.

The hopper floor clearance should be checked

and adjusted, if necessary, after every 80 hours of

operation.

TO EMPTY HOPPER

1. Stop the engine.

WARNING: Brush Throws Debris. Stop Motor

Before Lifting Hopper.

2. Grasp the hopper handles with both hands.

3. Lift and swing the hopper upward to remove

the hopper from the machine.

01196

REMOVING HOPPER

4. Dump the debris out of the hopper into

suitable refuse container.

5. Tip the hopper down and slide it into place

on the machine.

TO ADJUST HOPPER FLOOR CLEARANCE

1. Empty the hopper

2. Stop the machine on a smooth level floor.

3. Stop the engine and remove the spark plug

wire.

FOR SAFETY: Before Leaving Or Servicing

Machine; Stop On Level Surface, And Turn Off

Machine And Remove Key.

4. Loosen the three hopper top seal retainer

bolts on the hopper.

01210

HOPPER TOP SEAL RETAINER

A. Retainer Bolt

B. Hopper Top Seal Retainer

5. Place two 0.38 to 0.5 in (10 to 15 mm)

blocks on the floor under the hopper wear

plate.

6. Slide the hopper top seal retainer up or

down so that the retainer just touches the

machine frame.

7. Tighten the hopper top seal retainer bolts.

8. Remove the blocks from under the hopper

wear plate.

REAR GUIDE WHEELS

The rear guide wheels prevent the rear of the

machine from tipping. They are located just

behind the main brush shroud. Check the floor

clearance after every 160 hours of operation.

They should clear the floor by 0.38 in (10 mm).

TO ADJUST REAR GUIDE WHEELS

1. Stop the engine and remove the spark plug

wire.

FOR SAFETY: Before Leaving Or Servicing

Machine; Stop On Level Surface, And Turn Off

Machine And Remove Key.

2. Loosen the two bolts holding each of the

rear guide wheels in place.

3. Slide the guide wheels up or down so that

they clear the floor by 0.38 in (10 mm).

Содержание 140









































































































Результаты поиска

Содержание 140

Отзывы:

Похожие инструкции для 140

Бренды по названию

Популярные бренды

Tennant 140, Руководство оператора и каталог запасных частей

Результаты поиска

Содержание 140

Отзывы:

Похожие инструкции для 140

Бренды по названию

Популярные бренды