EN
Squeegee not cleaning or vacuum weak.
The edge of the squeegee rubber
EODGHVLQFRQWDFWZLWKWKHÀRRULVZRUQ
Replace the rubber blades.
)ORDWFRQWUROOHGVKXWRႇKDVEHHQ
tripped (dirty water tank full).
Empty the dirty water tank.
Squeegee suction hose clogged.
Unclog the hose.
The suction hose is not connected to
the squeegee or is damaged.
Connect or repair the hose.
Diverter valve dirty.
Clean diverter valve.
Battery not giving expected operational
endurance.
The battery charger is not working.
Replace battery charger.
ALARMS
Red Led alight on brush control button,
1 fast blink.
Brush motor overcurrent/short circuit.
6ZLWFKRႇDOOIXQFWLRQVRIWKHPDFKLQH
Restart the machine.
If the alarm appears again, make certain
that the brush is not being used on a
SDUWLFXODUO\URXJKÀRRU
If the problem persists, contact customer
service.
Red Led alight on brush control button,
2 fast blinks.
Detergent pump overcurrent/short
circuit.
6ZLWFKRႇDOOIXQFWLRQVRIWKHPDFKLQH
Restart the machine.
If the problem persists, contact customer
service.
Red Led alight on suction control button,
1 fast blink.
Suction motor overcurrent/short circuit.
6ZLWFKRႇDOOIXQFWLRQVRIWKHPDFKLQH
Restart the machine.
If the problem persists, contact customer
service.
Green battery charge Led blinking.
Excess battery voltage.
Check the integrity, operation and use
of the battery charger supplied with the
machine. Wait 10 minutes then try again.
%DWWHU\ FKDUJH FRQWURO /('V ÀDVK LQ
sequence.
Battery charging.
Remove the charging connector from the
battery.
%DWWHU\ FKDUJH FRQWURO /('V ÀDVK
simultaneously.
No communication between power
control card and touch card.
Wiring or card problem. Contact service.
/RJR /(' ÀDVKLQJ VORZO\ DQG GRXEOH
"buzzer beep" when the brush control
lever is pressed.
Machine position incorrect.
Make sure the machine is horizontal.
25