OPERATION
Tennant 1230 (7–96)
6
SAFETY PRECAUTIONS
The following symbol is used throughout this manual
as indicated in the descriptions below:
CAUTION: To warn of hazards or unsafe
practices which could result in minor
personal injury.
WARNING: To warn of hazards or unsafe
practices which could result in severe
personal injury or death.
FOR SAFETY: To identify actions which must be
followed for safe operation of equipment.
The following information signals potentially
dangerous conditions to the operator or equipment.
Read this manual carefully. Know when these
conditions can exist. Locate all safety devices on the
machine. Then, take necessary steps to train
machine operating personnel. Report machine
damage or faulty operation immediately. Do not use
the machine if it is not in proper operating condition.
FOR SAFETY:
1. Do not operate, maintain, or service
machine:
– Unless trained and authorized.
– Unless operation manual is read and
understood.
– In flammable or explosive areas
– With damaged cord or plug
– In outdoor areas
2. Before operating machine:
– Make sure all safety devices are in place
and operate properly.
3. When maintaining or servicing machine:
– Unplug power cord from outlet.
– Avoid moving parts. Do not wear loose
jackets, shirts, ties, or sleeves when
working on machine.
– Use manufacturer supplied or approved
replacement parts.
4 When using machine:
– Do not pull machine by plug or cord
– Keep cord away from heated surfaces
– Do not unplug by pulling on cord
WARNING: Hazardous Voltage. Shock
Or Electrocution Can Result. Unplug Power
Cord Before Working On Machine.
WARNING: Flammable Materials Can
Cause An Explosion Or Fire. Do Not Use
Flammable Materials In Solution Tank.
WARNING: Flammable Materials Or
Reactive Metals Can Cause An Explosion
Or Fire. Do Not Pick Up Flammable Materials Or
Reactive Metals.
CAUTION: Moving parts. Unplug Power
Cord Before Working On Machine.
GROUNDING INSTRUCTIONS
This machine must be grounded. If it should
malfunction or breakdown, grounding provides a
path of least resistance for electrical current to
reduce the risk of electric shock. This machine is
equipped with a cord having an
equipment-grounding conductor and grounding
plug. The plug must be plugged into an
appropriate outlet that is properly installed in
accordance with all local codes and ordinances.
Do not remove ground pin, if missing replace
plug before use.
Grounded Outlet
Grounding
Edge/hole
Grounded
3 Hole Outlet
Ground Pin
(120V)
(230V/240V)
FOR SAFETY: Connect to properly grounded
outlet only.
Store the machine indoors, do not expose to rain.
This product is intended for commercial use.
