OPERATION
15
Tennant 1230 (7–96)
3. Dump the solution out the recovery tank. Rinse
out the recovery tank and cover baffle with
clean hot water. Rinse screen filter mounted on
the recycle valve with clean hot water
(recycle
model only).
A
EMPTYING RECOVERY TANK
A. Recovery Tank
A
B
SCREEN FILTER (recycle model)
A. Screen Filter
B. Recycle Valve
4. Place the recovery tank back into the machine.
Reconnect the vacuum hose to the recovery
tank. Make sure that the tank gaskets are
seated properly.
POST-OPERATION
Check this list of items over after operating the
machine:
Check the power cord for damage and wear.
Wipe cord clean and wrap around handle of
machine.
Check for and remove any string or material
wrapped around the scrub brush.
Move the machine to an area to be kept until it
is needed again. It is suggested that both tank
covers be left slightly open for the tanks to
ventilate.
Lock the powerbrush head in the UP position to
prevent the brush taking a “set”. Lift the
powerbrush head from the floor and slide the
latch until it catches.
A
B
LOCKING UP POWERBRUSH HEAD
A. Powerbrush Head
B. Latch
Protect the machine from freezing when if it will
be stored or transported in areas where solution
in the system may freeze and damage the
components.
