OPERATION
Tennant 1230 (7–96)
16
OPTIONAL ATTACHMENT TOOLS
NOTE: For all attachments the vacuum and solution
hose is connected in the same way.
1. Attach male end of solution feed hose to the
female quick-disconnect on the machine. Push
the male connector in until it stops. Pull on the
hose to make sure it is connected.
A
B
CONNECTING SOLUTION FEED HOSE
A. Male Quick-Disconnect
B. Female Quick-Disconnect
2. Pull the vacuum hose off the recovery tank, and
firmly insert the hose cuff from the wand
attachment hose into the tank.
A
B
CONNECTING ATTACHMENT HOSE
A. Wand Attachment Hose
B. Recovery Tank
3. Attach the other ends of the solution and
vacuum hoses to the selected attachment tool in
the same way.
A
B
C
D
06598
CONNECTING ATTACHMENT
A. Solution Hose Quick-Disconnect
B. Vacuum Hose
C. Valve Handle
D. Selected Attachment
4. Press the bottom (l) of the hand tool switch.
Press the bottom (l) of the vacuum switch.
5. To disconnect the attachment, reverse the
above steps.
OPERATION OF ATTACHMENTS
The attachments only work properly by pulling them
toward you, not pushing. Set the vacuum end of the
tool on the surface to be cleaned and squeeze the
valve lever. Immediately begin pulling the tool toward
you, spraying the surface with detergent and
immediately vacuuming up the solution.
CARPET WAND
The carpet wand can be used for more inaccessible
places.
