Tenmars TM-1012, Руководство пользователя

Страница: 12 / 20

EN-10
TM-1012
Max. Input for DCV or ACV is 600V. Do not
attempt to take any voltage measurement which
exceeds the limits. Exceeding the limits could
cause electrical shock and damage the clamp
meter.
1.
Select “V~" range.
2. Insert the test leads into the jacks. The red test lead
plug into V/
Ω
jack, and the black test lead plug into
COM jack.
3. Connect the two long ends of test leads to the
desired circuit, and then reading will be displayed.
4. If the reading is difficult, Press DATA HOLD button to
hold the obtained value. To exit from this function,
press DATA HOLD button again.
4.4. DC VOLTAGE (DCV) MEASUREMENT
W
CAUTION A
RNING
Max. Input for DCV or ACV is 600V. Do not
attempt to take any voltage measurement which
exceeds the limits. Exceeding the limits could
cause electrical shock and damage the clamp
meter.