Tenmars TM-1012 Скачать руководство пользователя страница 18

Страница: 18 / 20

EN-16

TM-1012

4. Remove the batteries from battery holder carefully,

(replace them with new batteries UM-4 or IEC LR03
AAA 1.5V x 2).

5. Attach the battery cover back to its right place, and

tight it with screws.

7.1.

MAINTENANCE AND CARE

1. This meter is a precision digital instrument. Whether

in  use  or  in  storage,  please  do  not  exceed  the
specification  requirements  to  avoid  any  possible
damage or danger during use.

2. Do not use strong or abrasive detergents, water, and

wet cloth to clean the instrument. Do use a dry cloth
to clean the instrument.

3. Do not place this meter in high temperature or

humidity or expose to direct sunlight.

4. Once the measurement is completed, turn the rotary

switch  to  off.  Remove  the  batteries  from  battery
holder  if  the  instrument  is  not  be  used  for  a  long
period  in  order  to  avoid the  liquid  leakage  from  the
battery.

5. That all necessary requirements of inspection and

maintenance are not mentioned in this manual, a
qualified technician should perform it.

Содержание TM-1012





















Результаты поиска

Содержание TM-1012

Отзывы:

Бренды по названию

Популярные бренды

Tenmars TM-1012, Руководство пользователя

Результаты поиска

Содержание TM-1012

Отзывы:

Бренды по названию

Популярные бренды