Digital Multimeter
Page <2>
20/09/10 V1.1
http://www.farnell.com
http://www.newark.com
http://www.cpc.co.uk
Overview
This Operating Manual covers information on safety and cautions. Please read the relevant information carefully and observe all the
Warnings and Notes strictly.
Warning
To avoid electric shock or personal injury, read the “Safety Information” and “Rules for Safe Operation” carefully before using the
Meter.
Digital Multimeter Model UT60C (hereafter referred to as “the Meter”) has autorange and manual range options with maximum
reading 3999. The enclosure structure design adopted advanced “co-injection” technique in order to provide sufficient insulation.
In addition to the conventional measuring functions, there is a RS232C standard serial port equipped with Model
for easy connection with computer to realize macro recording and monitoring and capture of transient dynamic data, displaying
change of waveform during the measurement, providing data and evidence to engineering technicians for scientific research. This is
also a highly applied digital multimeter of good performance with full overload protection and backlight function. also has true rms
reading for AC voltage and AC current measurements.
Except where noted, the descriptions and instructions in this Operating Manual apply to all UT60C.
Unless otherwise identified, all figures show the .
Unpacking Inspection
Open the package case and take out the Meter. Check the following items carefully to see any missing or damaged part:
Item
Description
Quantity
1
Operating Manual
1 piece
2
Test Lead
1 pair
3
Test Clip
4
Model UT60C Point Contact Temperature Probe
1 piece
5
9V Battery (NEDA1604, 6F22 or 006P) (installed)
6
: RS232C Interfact Cable
7
: CD-ROM (Installation Guide & Computer Interfact Software)
In the event you find any missing or damage, please contact your dealer immediately.
