The DC Voltage ranges are: 6.6V, 66V and 600V
The AC Voltage ranges are: 6.6V, 66V and 600V
To measure DC/AC voltages, connect the Meter as follows:
Insert the red test lead into the
V Hz
terminal and black test lead into the
COM
terminal.
Set the rotary switch to
V
.
DC mesaurement mode and auto ranging is a
default. Press
SELECT
to switch to AC measurement mode.
Press
Hz
button to measure frequency or duty cycle, but the frequency or duty
cycle readings obtained from this range are only for reference.
Connect the test leads across with the object being measured.
The measured value shows on the display.
1.
2.
3.
4.
Note
When DC/AC voltage measurement has been completed, disconnect the connection
between the test leads and the circuit under test and remove test leads from the
input terminals.
Model 72-7228: OPERATING MANUAL
19
Содержание 72-7228
Страница 1: ...72 7228 P N 110401100913 Digital Clamp Multimeter...
Страница 2: ...Model 72 7228 OPERATING MANUAL...
Страница 17: ...Model 72 7228 OPERATING MANUAL Figure 2 Display Symbols see figure 2 15...
Страница 51: ...Model 72 7228 OPERATING MANUAL END This operating manual is subject to change without notice 49...
