Tenma 72-6854 Instruction manual
Table of Contents
Specification
1
Safety
3
EMC
4
Installation
5
Connections
6
Operation
6
Maintenance
8
Specification
OUTPUT SPECIFICATIONS
Voltage Range:
0V to 35V
Current Range:
0A to 10A
Power Range:
Up to 175W
Output Voltage Setting:
By coarse and fine controls.
Output Current Setting:
By single logarithmic control.
Operating Mode:
Constant voltage or constant current with automatic cross-over provided
that the power demanded stays within the power envelope, see graph.
Outside of this envelope the output becomes unregulated.
Output Switch:
Electronic. Preset voltage and current displayed when off.
Output Terminals:
4mm terminals on 19mm (0.75”) pitch. 30A max.
Sensing:
Switchable between local and remote.
Spring-loaded push terminals for remote connection.
Output Impedance:
Typically <5m
Ω
in constant voltage mode.
Typically >5k
Ω
in constant current mode (voltage limit at max).
Output Protection:
Forward protection by Over-Voltage Protection (OVP) trip; maximum
voltage that should be applied to the terminals is 50V.
Reverse protection by diode clamp for reverse currents up to 3A.
www.tenma.com
1
