55
Figure 4- 50 Select FSK function
1)
Set carrier signal parameters
Press Sine to select carrier signal as a sine wave if previously set to another mode (Default carrier signal is a sine wave)
when FSK modulation signal is on.
You can also set with the multi-functional control and direction keys. You can also press corresponding soft keys of
function again, when the interface below will display. To set some parameter, press corresponding soft key, input the
required value and select the unit.
Figure 4- 51 Set carrier parameters
2)
Set hopping frequency and FSK rate
Press MOD to return to the interface below after setting carrier parameters:
