75
Chapter 5 Fault Handling
Possible troubles and trouble shooting methods are listed in following. Please follow the steps to handle problems. If
you cannot handle them, please contact distributors of this product or local office, and also provide the equipment
informations of your instrument (acquisition method: press Utility
→System →System→About in turn).
5.1 No Display On Screen (Black Screen)
If the signal generator still does not display after pressing power switch on front panel
(1) Check that the mains lead is connected and mains power is turned on.
(2) Check the fuse in the mains plug.
(3) Check whether the power switch on back panel is in the ON position.
(4) Check that the power switch on front panel is in the ON position.
(5) If the product still cannot be used normally, please contact the supplier you purchased it from.
5.2 No Waveform Output
Setting is correct but no waveform is output
(1) Check whether the BNC cable and channel output terminal are connected correctly.
(2) Check that channel is turned on.
(3) If the product still cannot be used normally, please contact the supplier you purchased it from.
