10
Chapter 3 Quick Start
3.1 Handle Adjustment
The Tenma Series Function/Arbitrary Waveform Generator handle can be adjusted to carry and also support the unit.
If the handle position needs to be changed, please hold the handle on both sides and pull out, then rotate the handle
to the desired position, as shown in figure below:
3.2 Basic Waveform Output
3.2.1 Frequency Setting
Default waveform: A sine wave of 1kHz frequency and 100mV amplitude (with 50Ω termination).
For example the specific steps for changing the frequency to 2.5MHz are shown as follows:
a) Press Menu
→Waveform→Parameter→Frequency in turn to frequency setting mode. Set parameters by
pressing Frequency softkey to change frequency and period.
b) Use number keyboard to input the required number of 2.5.
c) Select corresponding unit MHz.
