Tenda TEH1208, Руководство пользователя

Страница: 15 / 29

switch is started, each port of the switch will automatically negotiate with
the connected devices and it will choose an optimal mode to maximize
performance of all devices. For non-Auto-Negotiation modes, it should
be matched and adjusted to status of other devices, or the others devices
should be at status of Auto-negotiation, otherwise, failure of
communication will occur. Flow control means that two connected
devices will control data flow and avoid packet loss. 802.3x mode is
suitable for full-duplex mode. Backpressure is suitable for half-duplex
mode. If two modes are all started, switch will choose flow control mode
automatically according to duplex modes.
Configuration of port management will affect port bandwidth control,
port mirroring and Trunking.
Figure 8
Port Configuration
¾
Port: Select the port which you are going to set.