switch
You must install DHCP+TFTP server software on your
computer before software updating, it is strongly recommended
that you should use haneWIN DHCP Server Ver2.1 or higher
version. After the configuration of DHCP server, click “Update”
button, updating of software takes around 2 minutes; switch will
restart after software updating, and you should re-log in.
Note: You could also visit our website
www.tenda.cn
to
obtain the updating data packet and the detailed operating guide
for updating. Please be careful in updating, it is suggest that you
should disconnect the network connectivity except the
connectivity with the computer for updating, and please avoid
power off in accident or computer broke down of the updating
computer.
3.3 Port Management
3.3.1 Port Configuration
In port management you can set: port Auto-Negotiation, speed, duplex,
and flow control mode respectively for each port. So you can choose the
port to work at status of: 10Mbps half duplex, 10Mbps full duplex,
100Mbps half duplex, 100Mbps full duplex and Auto-Negotiation, totally
5 modes. (Notice: Default mode is Auto-Negotiation Mode). When the
Содержание TEH1208
Страница 1: ......
