Tenda D151, Руководство пользователя

Страница: 37 / 103

Wireless Modem Router User Guide
- 37 -
 Clone MAC: Clicking this button copies the MAC address of your PC to the router. Many broadband ISPs restrict
access by allowing traffic only from the MAC address of your broadband modem, but some ISPs additionally
register the MAC address of the network interface card in your computer when your account is first opened. They
then accept traffic only from the MAC address of that computer. If so, configure your router to “clone” the MAC
address from the authorized computer.
 Dial on demand: Connect to ISP only when there is traffic transmission. This saves your broadband Internet
service bill.

PPP IP extension: If enabled, all the IP addresses in outgoing packets including management packets on the WAN
port will be changed to the device's WAN IP address. Only change the default settings if necessary.

Enable PPP Debug Mode: Only enable this feature if supported by your ISP.

Bridge PPPoE Frames Between WAN and Local Ports: If enabled, PPPoE dialup frame from LAN side will
directly egress the WAN port without modification.

Multicast Proxy: If enabled, the router will use multicast proxy.
If you are not sure about the options on this screen, simply enter your ISP user name and password and leave the other
options unchanged from defaults. Click
Next.
IPv6
If you select IPv4 as the network protocol, skip this section.
1.
Check Launch Dhcp6c for Prefix Delegation (IAPD).
2.
If your ISP is using stateful DHCPv6, check Launch Dhcp6c for Address Assignment (IANA) also. Or configure
a static IP address.
3.
Click Next -> Next -> Apply/Save.
WAN Gatewa
y