4
5
1. OPERATING ELEMENTS
OPERATING PRIORITY OF THE "OYSTER® TV" ON TWIN SYSTEMS
If you have chosen a TWIN system with two "Oyster® TV" devices, the system can only be controlled by the FIRST
"Oyster® TV". Usually this is the TV set in the living area of your motorhome. The second TV set cannot transmit
control commands to the antenna's control unit. This TV is usually installed in the bedroom.
However, you always have the option of operating the system from your smartphone or tablet (IOS or Android)
via the ten Haaft® app. See chapter 2.4 / page 9 of these operating instructions.
If you operate your satellite system using the app, this has priority first. This means that you can run in or ex-
tend the antenna or change the reception satellite even when the first TV is switched off; the app can control
the antenna even if the first TV is switched off and only the second TV is active or even if no TV at all is active.
But when the Oyster® TV connected as the main TV is switched on, it immediately takes over the operating priority.
Regardless of whether the antenna was previously run in or whether it has been set to a different satellite via the
app in the meantime. The system will ensure that the programme set on the main TV can be received. This also
happens when the main TV's START button on the remote control is pressed while the Oyster® TV is in operation.
If necessary, the antenna will run out or newly orient itself to the satellite on which the currently set channel
can be received.
When the main TV is switched off, the antenna runs in automatically even if the second TV is still to be operated.
However, automatic running in can be stopped by the "Open Sleep" function. For further information, see chapter
2.2. on page 7.
However, the Open Sleep function must always be newly activated when it is to be used. Activation is only possible
before the Oyster® TV is switched off.
When the second TV is to be operated without the main TV being switched on first, then you can also run out the
antenna at any time using the app.
It will remain extended until:
- the main TV was switched on and off again,
- the app is used again, or
- the vehicle's ignition/the engine is activated (terminal 15/ D+).
1. OPERATING ELEMENTS
1.2 Antenna operation
With normal setup of the Oyster® Premium antenna system, no antenna operation is required. After switching
on the TV set, the entire system operates fully automatically.
Nevertheless, you have the possibility to directly influence the antenna by various function keys on the Oyster®
TV remote control. However, these keys can only be used during when the TV set is on. When in standby, the keys
are not functional.
START:
When this key is pressed, the system aligns with the satellite.
STOP:
This key stops the moving antenna immediately in its actual position. Also used for Open Sleep, see
chapter 2.2, page 7.
PARK: This key runs in the system immediately, even when the main TV set remains on.
COUNTRY: This key is used to inform the system of the current location via a screen menu. (e.g. South Germany,
Northern Spain, etc.).
All other keys on the remote control of the Oyster® TV are used to operate the Oyster® TV. See the operating
instructions for the Oyster® TV, item 1.3 "Remote control"