BEFORE YOU
BEGIN
ASSEMBL
Y
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ELLIPTICAL OPERA
TION
CONDITIONING GUIDELINES
TROUBLESHOOTING &
MAINTENANCE
LIMITED WARRANTY
ASSEMBLY
STEP
PRE-ATTACHED
BOLTS AND WASHERS
LOWER HANDLEBAR
PRE-ATTACHED
SET SCREWS
UPPER HANDLEBAR
WAVY WASHER
After handlebars are assembled they will rotate freely – be cautious. Until the
machine is fully assembled, do not grab the handlebars for support.
NOTE: There is NO hardware bag for this step. All hardware is pre-installed.
A) Remove
PRE-ATTACHED BOLT & WASHERS
from
CONSOLE MAST.
B) Slide
LOWER HANDLEBARS
onto
CONSOLE MAST
and attach by re-inserting
PRE-ATTACHED BOLT & WASHERS.
C) Remove
PRE-ATTACHED SET SCREWS
from
UPPER HANDLEBARS
.
D) Slide
UPPER HANDLEBARS
onto
LOWER HANDLEBARS
. Secure
UPPER HANDLEBARS
to
LOWER HANDLEBARS
using
PRE-ATTACHED SET SCREWS
.
HANDLEBAR
COVERS
E) Snap the front and back
HANDLEBAR COVERS
together onto the
UPPER HANDLE BARS
. Note the position of
the snap tabs on the covers before snapping into position.
F) Repeat on other side.
Содержание 615E
Страница 1: ...ELLIPTICAL USER S GUIDE FOR MODELS 615E 645E ...
Страница 2: ......