Tempo Fitness 612T Скачать руководство пользователя

Страница: 13 / 41

CHAPTER 3: Console Instruction

3.2 DISPLAY WINDOWS INDICATION

•

SPEED:

Shown as km/h. Indicates how fast your walking or running surface is moving.

•

TIME:

Shown as minutes and seconds. View the time remaining or the time elapsed in your workout.

•

PULSE:

Shown as beats per minute. Used to monitor your heart rate (displayed when contact is made with the pulse grips

or thumb pulse sensor).

•

Distance:

Shown as km. Indicates distance traveled during your workout.

•

INCLINE (622T ONLY):

Shown as percent. Indicates the incline of your walking or running surface.

•

CALORIES:

Total calories burned during your workout.

QUICK KEY OPERATION

Once you have started your program you can quickly change your speed or incline level.

612T:

To change your speed, press one of the four quick speed keys: easy (5 km/h), moderate (8 km/h), hard (12 km/h) or

sprint (16 km/h). The treadmill will adjust accordingly.

622T:

Press the press to set speed or press to set incline key and then press a number (0-9). This confirms that this is the

speed or incline you want and the treadmill will adjust accordingly.

CLEAR CURRENT SE LECTION

To clear the current program selection or screen, hold the stop button for 5 seconds.

CHANGE VIEWING SCREENS

612T:

Press the START button during your workout to change the display between time/distance and heart rate/ calories.

622T:

To have the display rotate continuously (time, incline and pulse; distance, speed and calories), hold the

ENTER/CHANGE DISPLAYS button for 5 seconds.

TO RESET CONSOLE

Hold STOP key for 3 seconds.

FINISHING YOUR WORKOUT

When your workout is complete, the monitor display will flash and beep. Your workout information will stay displayed on
the console for 30 seconds and then reset.

Содержание 612T










































Результаты поиска

Содержание 612T

Отзывы:

Похожие инструкции для 612T

Бренды по названию

Популярные бренды

Tempo Fitness 612T, Руководство по обслуживанию

Результаты поиска

Содержание 612T

Отзывы:

Похожие инструкции для 612T

Бренды по названию

Популярные бренды