6.
If equipped with a choke, move the choke lever to
the ½ position until the engine runs smoothly and
then to the open or off position.
7.
Move the throttle to the desired speed.
NOTE:
Some blowers may tend to “walk” if the throttle is
not in the full position
.
STOPPING
1.
Move the throttle to the
“IDLE”
position.
2.
Move throttle lever to the
“OFF”
position unless
equipped with a stop switch. If a stop switch is
provided, turn the switch to the
“OFF”
position.
Operating
Procedures
4.5
