Operation continued…
run. Please review the engine manufacturers
Owners Manual regarding starting and stopping as
well as the instructions in this section before
actually starting the blower.
CAUTION: NEVER MOVE THE BLOWER
WHILE IT IS IN OPERATION. SEVERE
PERSONAL INJURY IS POSSIBLE AS WELL
AS DAMAGE TO THE BLOWER.
ALWAYS SHUT-DOWN THE BLOWER
PRIOR TO MOVING!
SET-UP
Position the blower in the desired location,
making sure it is placed on a flat, hard and debris
free surface.
STARTING
1.
Set the fuel valve in the
“ON”
position.
2.
Set the stop switch to the
“ON”
position.
3.
Set (if equipped) the choke lever to the
“CLOSED”
or
“STARTING”
position.
4.
Set the throttle lever to the
“STARTING”
position.
5.
Grasp the starter handle, take up the slack, and
pull the rope briskly. Let the rope return slowly.
Repeat as necessary until the engine starts. Do not
over pull the rope.
Operating
Procedures
4.4
