background image

Tstat7 Thermostat

      

       The wiring diagram above outlines the basic functions the TSTAT7 thermostat can do for you. 

With four analog/digital inputs you can plug in occupancy sensors, flow sensors, fan status, freeze 

protection, power meters and BTU meters just to name a few. There are 2 analog outputs that can be 

used for modulating valves and modulating dampers. It comes equipped with a RS485 network that 

can be connected to a controller like a boiler as illustrated above.

       On the other side we have five relay output capabilities which can be used for air handler units, 

fan coil units, heat pumps and many other different types of hydronic applications.    

                    

       The TSTAT7 thermostat is compatible with any desire you need and the perfect fit for your next 

installation.

Operational Functions

   

    The buttons both the up arrow and down arrow al-

low the consumer to increase or decrease the desired 

set-point they wish to have. To adjust the set-point on the 

room sensor can only be done when the occupied symbol 

is being displayed on the LCD display. To increase the 

set-point temperature by a degree simply hit the up arrow 

button. To decrease the set-point temperature by a de-

gree simply hit the down arrow button and continue either 

step until desired set-point is achieved. After the set-point 

is increased or decreased the LCD screen will display the 

current set-point, until the temperature in the room reach-

es the desired set-point (warmer/cooler) of the occupant.

1) Adjustable set-points

2) There are six buttons that operate the Tstat7:

Buttons

Functions

Top button (right side)

Increases setpoint

Second button from top (right 

side)

Decreases setpoint

FAN Mode: Middle button (right 

side)

Adjusts manually/automatically the fan speed to 

satisfy cool air temperature

Main MENU: Second button 

from bottom (right side)

Optimizes the settings of heating/cooling, clock, 

schedule, etc 

Ok: First button from bottom 

(right side)

To save or  enter a setting in the main menu

Override switch 

unmarked (center of front cover)

For new occupancy adjustments

Содержание Tstat7











Отзывы: