Installation Mounting
1)Unfasten the screw located
at the base and lift off the
front panel of the enclosure.
2)Wall mount: Fasten the screws on the back
panel to the wall, and re-attach the front panel
to the now mounted panel. Refasten the
screw at the base connecting both panels.
3)Standard ‘11-10’ electrical box:
Fasten the screws on the back
panel to the electrical box, and
re-attach the front panel to the
now mounted panel. Refasten
the screw at the base connect-
ing both panels.
OR
Tstat7 Thermostat
Set net ID, Baudrate and protocol through main menu button
1. Press the menu several times to
display advanced and then press “OK”
2. Press menu again(Press multiple times until the
net ID option is found, Change by up and down key)
3. Press menu again(Press multiple times
until the baudrate option is found, Change
by up and down key)
4. Press menu again (press multiple times
until the protocol option is found, press up
and down to select Bacnet or Modbus)
