Multicolor LED flashing
AD699/L10M
“IP COMMUNICATION AND SECURITY COMPANY”
AD699/L10M-SEGN-MULTICOLORE-2203 *Product specifications may change without notice*
WWW.TEMATLC.IT
1
Technical Features
Supply voltage DC
: 12Vdc – 24Vdc
Supply voltage AC
: 12Vac – 18Vac
Power
: 2,5W-5W
Temperature
: -20° +60°
Protection grade
: IP56
Diffusion cap color
: White
LED
: 6 Multicolor LEDs, 6 White LEDs
Functionality
: steady or flashing light, with programming
buttons
AD699/L10M
Multicolor LED flashing
Installation
● Install the flasher on a smooth and flat surface so that the rear gasket fits snugly
● Clean the back of the box from dust or grease
● Apply the adhesive gasket so that it seals the edges of the exposed area
● Press the gasket so that the adhesive adheres perfectly to the box
● Fix the box so that it is pressed as much as possible on the installation surface
● If necessary, seal the exposed printed circuit area (where there is the input terminal block) and the rest of the
box with silicone
● Close the transparent cover tightly by turning it clockwise
Note: images are indicative and may vary according to production
The AD699/L10M light indicator allows you to emit light with programmable
colors and intermittent emission, which are also programmable through 2
buttons which can be accessed by unlocking the cover with a clockwise rota-
tion. The following 7 colors can be selected: white, red, green, blue, light
blue, yellow, pink. Activation can be programmed simply by powering the in-
dicator with a voltage from 9V to 24V in direct or from 9 to 18V in alternat-
ing. It is possible to keep the module powered at rest and provide a contact
from the outside on a specific terminal. During the programming phase, by
setting up a special internal switch, the brightness of the LEDs is reduced so
as not to disturb the operator, at the end of the programming the normal
brightness will be restored.
