tema AA-539K Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 65

background image

TEMA TELECOMUNICAZIONI SRL

Doorphone AA-560

MAS-AA560-REV04EN

Page 22 of 65

COMPLETE outdoor BOX (Accessory option AA-549-S)

The  complete  box  is  a  cover  that  completely  houses  the  AA-560
system,  both  the  front  panel  which  is  protected  as  using  the  AA-
549-T shield, and also the metal rear box of the system.

Using the accessory AA-549-S it is no longer  necessary to recess
the rear metal box of the system. The entire system will be housed
in the metal box AA-549-S and will be on the surface of the wall.

The  complete  box,  unlike  the  other  two  previously  described  accessories,  presents  a  radically  different  mode  of
assembly. The tubes with electrical cables for the system should  not be taken to be flushed  metal box  but directly
to one of the holes on the back (case with cables not visible) or face down box complete (case of exposed wires).

Take the box from its packaging and place it on a work surface.

•

Remove the front frame "CF", unscrew the 4 screws "A" on the bottom releasing the metal shell "GM" and
remove it.

•

Open the holes "B" you want to use for securing on the wall the full metal box "SC" with the help of a tool that
pushes away the preprinted material that covers every single hole to be released.

•

Open also the holes "C" that you want to use for the passage of cables, in the same way.

•

Place the full metal box "SC" directly on the wall to mark the holes to be made for fixing it. Perform drillings on
the wall for the provided anchors for fixing, finally place the metal box and tighten the screws of the anchors to
secure it to the wall.

•

Having  previously  defined  the  openings  for  cable  entry  on  the  metal  box,  open  the  corresponding  pre-drilled
"C"  also  on  the  back  metal  shell  "GM".  It  is  possible  to  use one  on  the  top  or  one on  the  bottom  of  the  rear
(properly orienting the metallic shell "GM") and one on the lower side of the full metal box "SC".

•

Tighten the four screws "A" of the metal back "GM" to the metal box "SC" to reassemble it inside the metal
cover and re-seal the base of the front panel of the system.

•

Proceed to connect the cables to the system board (see connections section).

For the closing of the system after the cable connection and commissioning, support the front frame "CF", align the
two pins of transparent plastic of the front frame of the system on their insertion holes on the left side of the front
flat frame "CF ", insert gently until it stops.

Then rotate all over the front panel to close the box and get ready to tighten the 4 special screws planned for this
purpose. Ensure that the panel rests firmly on its aluminum frame, and accompany the cables verifying that are
properly seated and not get caught between the front and rear walls of the half-shell.

GM

CF

A

B

SC

C

«
...
20
21
22
23
24
...
»

Содержание AA-539K


































































Отзывы:

Нет отзывов

Похожие инструкции для AA-539K

Бренд: Ace Страницы: 13

Бренд: M-E Страницы: 20

Бренд: M-Audio Страницы: 12

Бренд: Teac Страницы: 3

HiFi Speaker System

Бренд: Eltax Страницы: 2

Productivity 2000 P2-08NAS

Бренд: Automationdirect.com Страницы: 4

Бренд: HK Audio Страницы: 20

Бренд: Jensen Страницы: 13

Бренд: QTS Страницы: 50

Бренд: Discount Car Stereo Страницы: 4

Бренд: Ebinger Страницы: 48

Бренд: JBL Страницы: 2

Бренд: AES global Страницы: 16

sundi SAMBA ST-950

Бренд: Zamel Страницы: 24

BFT-GSM-5ABK/3GE

Бренд: AES Страницы: 29

Бренд: JK Audio Страницы: 24

Digital Villa VTO2 Series

Бренд: Dahua Страницы: 39

Бренд: Polk Mono Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды