TEMA TELECOMUNICAZIONI SRL
IP Module AA-600
MAS-AA600-REV02EN
Page 32 of 56
How to activate the call messages
To activate / deactivate a call message, you need to call the system and its response dial the programmed code
followed by key, and so message: for example, if the activation code was set to ##, to turn on the key 1 as the Day
message 3 should dial the sequence "## 0103". To deactivate “##0100”.
NOTE 1:
in the basic version can be loaded messages of length of 60 seconds. For longer messages you need to enter a
license to expand the page programming system.
NOTE2:
standard messages in the system to its delivery (unless specifically requested custom) are those listed below:
MSG1: “La chiamata è stata inoltrata, attendere prego” (Italian)
MSG2: “Your call has been forwarded, please wait” (English)
MSG3: “La chiamata è stata inoltrata, attendere prego, Your call has been forwarded, please wait” (IT/EN)
Messages related to alarms by codes are rigidly associated.
ALR1: “Alarm 1”
ALR2: “Alarm 2”
ALR3: “Alarm 3” ( ALR4, ALR5, ALR6 are not used)
How to active an announcement by telephone
As see before, announcement messages can be played when the corresponding input changes. It is also possible
to make the same thing during a telephone call. In the filed “Announcement activation code” insert the code for this
function:
In the example the code is “99”. Simply, follow the announcement number after this code (from 1 to 6). When the
play starts, the call is hung up (internal extension will be freed). Attention please: the message could also be very
long, so if you need to interrupt it for some reason, simply call the system, the message will be stopped to make
room for new communications.
