TEMA TELECOMUNICAZIONI SRL
Doorphone AA-550
MAS-AA550-REV07EN
Page 51 of 67
MSG2: “Your call has been forwarded, please wait”
MSG3: “La chiamata è stata inoltrata, attendere prego, Your call has been forwarded, please wait”
Messages related to alarms by codes are rigidly associated.
ALR1: “Alarm 1”
ALR2: “Alarm 2”
ALR3: “Alarm 3” ( ALR4, ALR5, ALR6 are not used)
How to active an announcement by telephone
As see before, announcement messages can be played when the corresponding input changes. It is also possible
to make the same thing during a telephone call. In the filed “Announcement activation code” insert the code for this
function:
In the example the code is “99”. Simply, follow the announcement number after this code (from 1 to 6). When the
play starts, the call is hung up (internal extension will be freed). Attention please: the message could also be very
long, so if you need to interrupt it for some reason, simply call the system, the message will be stopped to make
room for new communications.
Audio Multicast streaming
By enabling this feature, AA-550 will listen to the specified address / port, and can reproduce on its speaker any
received audio streaming. This function has a lower priority than the normal telephone operation of the system
(outgoing or incoming calls will block or prevent the reproduction of the audio stream).
It is possible to configure up to 16 multicast addresses, each one with an higher priority than the previous. In the
above example, there are two addresses. The first (..43) could be used to play music at low volume from a PC. The
second (..44) could be an announcement from a special programmed phone for Multicast with an higher volume.
Generally the music is always on but will stop immediately when an announcement from the phone is received.
