TEMA TELECOMUNICAZIONI SRL
Doorphone AA-550
MAS-AA550-REV07EN
Page 40 of 67
9.3. Network parameters
On this page it is possible to set the network parameters, such as IP address, netmask, etc.:
The default IP address of the device is
192.168.0.10/24
. Gateway and DNS are only needed if you want the device
to have the ability to access the Internet (for example to get the current date / time, in the example from the site
time.nist.gov).
The changes to the network settings are taken over by the device until the next reboot. Once you have completed
the configuration steps so be sure to reboot the system and if necessary, change the network segment of your
computer so that it can connect to the new address.
•
IP address
: specify the IP address you want to assign to AA-550.
•
Subnet mask
: indicate the subnet mask to be assigned to AA-550.
•
Default gateway
: indicate the gateway that can enable AA-550 to access to internet.
•
Primary and secondary DNS server
: indicate the addresses of two DNS servers you want to use to resolve
IP addresses.
•
Time server
: indicate the address of the server you want to use for time synchronization device.
•
Test address (ping)
: if programmed, this field contains the address used to test the network card.
•
SMTP server
: name or IP address of the mail server.
•
Port
: tcp port for the connection. Usually is 25
•
User
: authenticated user on the SMTP server
•
Password
: SMTP authentication password
•
TLS connection
: activate the secure connection
•
Destination
: email destination
•
Text message
: text to be included in the email sent
The button “Test Mail” can be used to test immediatly if the configuration works.
