24
Mike’s Talk Around
TM
Making and Receiving Code Calls in
Mike’s Talk Around
To make a code call in Mike’s Talk Around:
1
Press and hold the PTT button.
Transmit
appears on the first line of display. Begin
speaking after your handset emits the Mike’s
Talk Around tone.
2
Release the PTT button to listen.
The tone emitted from your handset when using
Mike’s Talk Around is 4 beeps and sounds different
from the standard tone heard with on-network
Private and group calls.
If you receive an error message:
•
There may be no parties on your channel or
code.
•
You are out of range.
When you receive a code call using Mike’s Talk
Around,
Receive
appears on the first line of the
display.
Note:
An incoming Mike’s Talk Around call can
be terminated at any time by pressing
e
.
Receive All
You can set your handset to receive Mike’s Talk
Around transmissions from any handset that is set
to the same channel, regardless of the code (1-15),
by setting the code to
Receive All.
When you
receive transmissions with the code set to
Receive
All
, the display changes from
Receive All
to the
code on which the transmission was received.
Tip:
You can reply to an incoming call within 6
seconds after hearing the short ending
beep by pressing the PTT button.
Note:
You cannot initiate a code call when the
code is set to
Receive All
. If you press
the PTT button with the code set to
Receive All
, you will receive an error
message.
To set the code to
Receive All
:
1
From the Talk Around idle screen, press
A
under
Edit
.
2
Scroll to
Code
.
3
Press
A
under
Edit
.
4
Select
Receive All
.
5
When you are finished, press
A
under
Back
to
return to the Talk Around idle screen.
