www.telular.com
Telular SX7P
(1). Connect the USB Type B connector of the power supply to the AC
power input on the rear panel of the SX7P.
Do Not Twist the Connector.
(2). Plug the AC power cube into the wall socket.
(3). Press and hold the ON/OFF button for 3 to 5 seconds.
(4). Check the cellular signal strength and move the unit until the best sig-
nal possible is achieved.
Note:
Select a location that is above ground and
as close to windows (or exterior walls) as possible to get the best signal.
Please read the“Service Indication” section for more information.
0LUGINTHE0OWER
SUPPLYHERE
/RPLUGINTHECOMPUTERDATACORDFORPOWERSUPPLY
ORDATADOWNLOADINGDATAFUNCTIONISAVAILABLEON
3803ERIESONLY
.OTE4HECOMPUTERDATACORDISNOTINCLUDEDINTHEPACKAGE
6. Connect the SX7P to AC
Power
15
Getting started