www.telular.com
Telular SX7P
Call functions
26
now active. To switch back to the handset, unplug the headset from the
headset jack.
Note:
When making a call using the
Speaker
button, connect the Head-
set after the
Speaker
button has been pressed and call initiated.
If the Headset is already connected, the Headset audio will not be active
when a call is originated in Speaker mode.
II. Receiving a call:
If the Headset is already plugged in, when a call comes in, the ring tone
will be heard in both the speaker and the headset. To connect the phone
call on the Headset, press the Headset button or lift the handset
from the phone.
To switch back to the handset, unplug the Headset from the headset jack.
When connecting a call through the speaker, press the
Speaker
button.
Note:
When receiving a call using the
Speaker
button, connect the Head-
set after the
Speaker
button has been pressed to connect the call.
If the Headset is already connected, Headset audio will not be active
when a call is originated in Speaker mode.
III. During a call:
During a call on the handset, keep the handset off the phone and plug
in the Headset. To switch back to normal handset mode unplug the Head-
set. When the call is on speaker, plug in the Headset. The
Speaker
but-
ton is still lighted. To switch back to Speaker mode, unplug the headset.
IV. Ending a call:
To end the call when using the handset, place the handset on hook or
press the Headset button located on the headset.
When a call is connected using the
Speaker
button, press the
Speaker
button again or press the Headset button to end the call.