Teltronics SEB NET-PATHm, Инструкция по установке и эксплуатации, Страница: 45 / 64

NET-PATHm Installation and Operation Guide
Page 3-13
RLOGINIP RLOGINIP IPaddress ServerUsername
ClientUsername Port TerminalType/Speed
Example:
RLOGINIP 172.16.3.24
XYZServer XYZClient 513 TTY/
9600
Establish an RLOGIN session using the target
host's IP address.
IPaddress = the targeted address of the remote
device
Note: The IP address is a required parameter.
ServerUsername = the name that the server uses
to execute the command on the server
ClientUsername = username that requests the
RLOGIN session
Port = the port number that is dedicated to
RLOGIN communications. The default value
is 513.
TerminalType/Speed = the terminal type or speed
used
RLOGINHOST RLOGINHOST HostName
Example:
RLOGINHOST XYXHost
Establish an RLOGIN session using the target
host name
HostName = the name of the target host device
RUN* RUN ScriptName
Examples:
RUN “MyScript”
Executes a Python automation script that is
contained in RAM or FLASH memory. The script
name is case sensitive.
SCHEDULER SCHEDULER [START \ STOP \
HOSTNAME]
Examples:
SCHEDULER START
SCHEDULER STOP
SCHEDULER
SCHEDULER “My Host”
Starts, stops, or views scheduled tasks that are
defined in the database. If no options are present,
all scheduled tasks display. If a host name is
given, only tasks for that host display. If a
command is given, it is sent to the scheduler.
START = start the scheduler
STOP = stop the scheduler
HOSTNAME = lists scheduled tasks for the
specified host.
Table 3-1: NET-PATHm Commands