8
Configuration process begins by pressing on connected device
(
Figure 9 Device connected via USB
).
After connection to Configurator
Figure 10 Configurator Status window
).
Iridium device can send short burst data (SBD) to server. This
means that some data can be sent from FM device to server
through satellites. In order to get those records, you have to
connect the device to FM6 COM1 or COM2 port. Select COM1 or
COM2 mode Satellite backup mode. Those settings can be found in
RS232/RS485 TAB in the configurator. Baud rate for satellite
devices is 19200 bps.
(Figure 11 COM Settings)
Furthermore, TSM232 functionality should be enabled. These
settings can be found in the
TAB in Short burst data
settings.
(Figure 12 SBD Settings)
More details about TSM232 configuration using Configurator can
be found in our
Figure 9 Device connected via USB
Figure 10 Configurator Status window
Figure 11 COM Settings
Figure 12 SBD Settings
