25
PPPoE. This protocol is mainly used by DSL providers:
This is the configuration setup for when you select PPPoE protocol.
Filed name
Sample
Explanation
1.
PAP/CHAP username test
Your username and password that you would use to connect to your
carriers network.
2.
PAP/CHAP password
your_password
3.
Access Concentrator
isp
Specifies the name of access concentrator. Leave empty to autodetect.
4.
Service Name
isp
Specifies the name of the service. Leave empty to autodetect.
Advanced
These are the advanced settings for each of the protocols, if you are unsure of how to alter these attributes it is highly
recommended to leave them to a trained professional:
Static:
Field name
Sample value
Explanation
1.
Bring up on boot
On
Specifies whether the interface will be configured and brought up
when the router boots up. Disabling will render your WAN
connection non-functional
2
Disable NAT
On/Off
Toggle NAT on and off.
3.
Override MAC address 00:0C:43:30:50:38
Override MAC address of the WAN interface. If your ISP gives you
a static IP address it might also bind it to your computers MAC
Содержание RUT700 HSPA+
Страница 1: ...1 USER MANUAL...
Страница 6: ...6 Device connection...
