Teltone TLS-3B, Руководство пользователя

Страница: 18 / 24

TLS-3B User’s Manual
40-400-00032, Rev. B 12
Network Response Delay
This command specifies the amount of time from the last dialed digit until the TLS-
3B starts to send Ringback, Busy, or Reorder tone. The time variable sets the duration
in 100 mS increments and the range is 0 to 511. The factory default is 200 mS, i.e.
*21#2#.
*21#time#
Second Dial Tone Number
This command defines the telephone number (up to 16 digits) that instructs the
TLS-3B to issue a second dial tone. Valid numbers are 0-9. The factory default is
711.
*13#number#
Second Dial Tone Delay
This command specifies the amount of time from the last dialed digit of the Second
Dial Tone Number (see Second Dial Tone Number command) until the TLS-3B
returns a second dial tone. The time variable sets the duration in 100 mS increments
and the range is 0 to 255. The factory default is 500 mS , i.e. *22#5#.
*22#time#
Busy Signal
This command defines the response to a busy condition. If the other line is off-hook
when you dial its number, the TLS-3B will return an audible busy indication, which
may be either a busy signal or a reorder tone.
Busy Signal *30#0# (default)
Reorder Tone *30#1#
Non-Valid Number Signal
This command defines the non-valid number signal. When you dial a number that is
not programmed to ring the other line or reach a test tone, the TLS-3B returns an
audible non-valid number signal, which may be either a busy signal or a reorder tone.
Busy Signal *31#0#
Reorder tone *31#1# (default)