40-400-00022 Rev. B
25
Select entry > 51
RECONNECT TO LAST ACCESSED PORT (enter number)
0 = Disable
1 = Enable
Current Value: 0 (Disable)
New Value :
Select entry > 52
PORT ROLLOVER TIME-OUT
1-255 seconds (0 = Rollover Disabled)
Current Value: 0
New Value :
4.
REPORTS
These menu items are commands that will display information regarding the
setup of the DS-100.
Select entry > 3
60. SYSTEM CONFIGURATION REPORT
61. ALARM REPORT
99. EXIT
The DS-100 will display the entire configuration of the unit in either a continu-
ous scrolling screen (if PAGE? Y/N is answered N), or one page at a time (if
PAGE? Y/N is answered Y). You may print this information (if a printer is
attached to your PC) or store this information on disk.
Select entry > 60
CONFIGURATION REPORT
Press <ESC> at any time to abort
PAGE? (Y/N)y
SITE NAME: DS-100
Version: 2.00
SYSTEM PASSWORD: ............................................ Prompt: Disabled
SIGN-ON MESSAGE: ............................................... None
PROGRAMMING PASSWORD: ................................ teltone
PROGRAMMING INACTIVITY TIME-OUT
1-25 minutes (0 = NO TIME-OUT): ..................... 3
TRANSFER CODE CONFIGURATION
Prefix:
ab
Case Sensitive:Disabled
Response:
Enabled
Guard Time:
10
Broadcast:
Disabled
DATA INACTIVITY TIME-OUT
1-25 minutes (0 = NO TIME-OUT): .................... 3
OUTGOING CALL PRIORITY: ................................. None
EMERGENCY INTERRUPT ENABLE: ..................... Disabled
TIME-OUT ALARM: .................................................. Enabled
