16
T-Gateway Setup
A) Telstra NBN Customers
• If you have had a
Telstra Broadband (NBN)
service installed at your premise you will not be required to
perform any additional wiring on the T-Gateway. Once you have linked your T-Voice 502 to the gateway you
will be able to make and receive calls.
• If you have had a
Telstra Broadband (NBN)
service installed that did not require any NBN equipment to be
installed at your premise, follow the same instructions as the
Telstra Broadband (ADSL)
service
B) Telstra Broadband NBN with Existing Phone
• If you have an existing phone you would like to continue to use, insert the phone cable of the existing phone
into the green
Phone
socket on the back of the Telstra gateway, as shown below.
